The Spigen Slim Armor CS is one of the best cases you can get for your iPhone 7. This case is particularly great for you if you want the ability to store a card or two in your phone case. The exterior card slot can hold up to two cards while the case continues to carry out its primary responsibility of providing protection for the iPhone 7. It has a slim design and has two layers to provide additional protection for your phone. The interior is made of shock-absorbing thermoplastic polyurethane, while it features a polycarbonate exterior. Air Cushion Technology, in addition to the two layers, helps provide adequate protection for your phone during your day to day activities. The exterior also has raised edges along the screen and camera area to prevent scratches and scuffs.

The exterior card slot of the Spigen Slim Armor CS helps hide the details of your card from prying eyes, and it is built with strong and qualitative materials. Despite the protection and slot, the case still manages to maintain its slimness and is only half an inch in thickness. Hence, you can easily fit it into your pocket or purse. The case supports wireless charging, even with the cards present inside the holder. However, you should remove your cards before using the wireless charging function, so you don't damage the chips on the cards.

Great protection, cardholder, slim design, wireless charging - with these functions, the Spigen Slim Armor CS is a great iPhone 7 case, and you should get one for your phone.

The Otterbox Defender Series Case is a great phone case that offers more than adequate protection for your phone from damages that occur from falls, bumps, or even being run over by a car. The case is made of polycarbonate and synthetic rubber materials. It has three protection layers, which are the screen protector, the inner shell, and the outer cover. A holster allows you to attach it to your belt clip for carrying it around. However, the holster is not detachable from the case. The holster can also function as a kickstand, which can come in handy when viewing media files on your phone.

When it comes to protecting your phone's ports from dust and debris, you can trust the Otterbox Defender Series Case. It comes with port covers to prevent dust from infiltrating your phone's ports. The case offers rugged protection for iPhone 7 users who are fans of the outdoors as it guards against the roughest drops or bumps you might encounter during your outdoor adventures. The design is a tight fit, so you can't use your extra screen protector under it if you have one prior to buying this case. You should, however, note that some users complain of the rubber protection for the ports begin to peel after a while. The case is suitable and very functional for people in the construction industry or those whose phones have to suffer some sort of abuse for one reason or the other. If you don't belong in this category, then the phone might be overkill for you.

The Mkeke Compatible with iPhone 7 Case 2020 has and hybrid structure and is made of polycarbonate and thermoplastic polyurethane materials. It is equipped with a Shock Absorption Technology that makes it protect your iPhone 7 during a fall. It is also scratch-resistant. Hence, you won't have scratches disfiguring your phone case in a short while. The case is slim and fits your phone tightly. It is also lightweight. Hence, you won't feel an additional weight when carrying it around with your phone. It has a precise design fit for all the buttons on your phone, and the cutouts match the space required for your charging port, camera, and speakers. It does not show fingerprint smudges and is easy to clean. Therefore, you don't have to worry about needing to do a lot of work in order to clean your transparent phone case.

The Mkeke Compatible with iPhone 7 Case 2020 has a minor lip around the screen edges. However, this is not thick enough, and it does not come with a screen protector. Hence, you will need to provide a screen protector on your own. The transparency makes it possible for you to showcase your phone's beauty while it provides a great grip for your hand, and it does not feel slippery even when your palms are sweaty. It provides nice shock absorption while retaining the slim look the iPhone has. Overall, it is a great case for your iPhone 7, and if you do not want the transparent option, you can buy the black color and enjoy slim, beautiful protection for your phone.

The Speck CandyShell Grip has its uniqueness in the form of rubber line strips that appear at the back of the phone case. The rubber strips give it the non-slip grip feature as it makes it harder for your phone to slip out of your hands, even if your hands are wet. This design perfectly merges two layers of protection into a single rubber body that is easy to put on or take off from the phone. The rubbery interior is soft and does not affect the phone's exterior while providing an adequate cushion for the phone in the case of a fall or a bump. This case has been military-grade tested by dropping it onto a hard surface with the iPhone inside. The phone continued to function as if it was never dropped.

The phone has raised bezels around the frontal part to protect the screen from scratches when placed on a flat surface. The rubber lips also provide friction and prevent your phone from falling of flat surfaces when placed screen down. You also get to protect the coating on your phone's volume and power buttons because the Speck CandyShell Grip has rubber covers layered over them. With the protection provided, the CandyShell Grip manages to remain slim and fits your phone perfectly. It's not bulky to carry around and is suitable to use in holding your phone when taking various photographs.

This is a great iPhone 7 case for the regular user and comes with as many as eight color options for you to find your choice.

The Unicorn Beetle Pro Series Case by Supcase is a dependable, rugged phone protector for iPhone 7 users. The case is constructed in two sections. The front section cups around the phone and has an inbuilt screen protector, which is not detachable from the case. This front section is also raised around the edges to give further protection to the screen by lifting it off surfaces. Hence, your phone's screen is protected whenever it falls on a flat surface, which is the most common situation. The back part is made of shock-resistant thermoplastic polyurethane and drop-resistant polycarbonate materials. This helps protect the back of your phone against damage caused by drops and bumps. The cutout area around the camera and flashlight are also raised to protect it from scratches and any damage that might be caused by particles on a flat surface.

The back and frontal parts of the Supcase Unicorn Beetle Pro fit snugly with each other and prevent any bumping around of your phone inside the case. There are port covers to prevent dust and debris from posing any threat to your phone's ports. The back part of the case can be clipped into a belt clip swivel holster, which you can use to carry it around or support the phone when viewing media content such as videos on it. You have five color options, which are blue/black, black/black, green/gray, pink/gray, and white/gray.

The case is a great choice for you, and you will add to your phone's durability by using it.

The Spigen Tough Armor Case is a great iPhone 7 case that has been tested and certified according to military standard. It has extreme dual-layer protection made with thermoplastic polyurethane and polycarbonate materials. It also has a kickstand at the back, which can come in handy when viewing multimedia files on the phone. The kickstand works well in the landscape mode. There are raised lips around the screen and camera that offer protection against scuffs and scratches. The rubbery compound feel that you get when touching the corners also gives it the advantage of not breaking no matter the number of times it hits the floor. It also makes use of the Air Cushion Technology to absorb the shock in the event of a fall or bump. You get a tactile response from your phone's buttons while using this case, and you can use a wireless charger to juice up your battery without having to remove the case.

It has a slim design that makes it easy to slide in and out of your pocket and still provides your phone with the needed protection. It is easy to install on your phone as you simply have to clip it on or off. You can choose from five colors, including gunmetal, blush gold, champagne gold, red, and rose gold. You should, however, note that the gunmetal option is coated with a different coating that makes it susceptible to peeling after a while.

The Spigen Tough Armor Case is a solid case, and you should consider it if you use an iPhone 7.

The OtterBox Commuter Series Case lets you enjoy your phone without fears of drops and bumps. It has two tough layers to help deflect impact in the case of a fall or bump. The case also comes with port covers that protect your ports from the onslaught of debris and dirt. Hence, with the commuter series, you can rest easy knowing your phone is in good hands, or in this scenario, in a 'good iPhone 7 case'.

The OtterBox Commuter Series Case has a sleek design that makes it pocket-friendly. You can easily slide it in and out of your pocket whenever you have the need to use your phone or keep it in your pocket. It has grippy edges that make it easier to hold without much effort or stress on the hand.

However, as good as this iPhone 7 case is, it does not come with a screen protector. Hence, it is left to you to get a screen protector for your phone. This does not mean you have anything to worry about if your phone falls on a flat surface. The Commuter Series comes with a nice lip around the screen that ensures your screen will suffer no scratch or crack when it falls on a smooth and flat surface. Some users have commented that it might be a bit difficult to put on your phone because of the tight fit. However, this is an advantage as it means your phone won't be slipping out of the case or jiggling around.

The OtterBox Symmetry Series Case is great for the user who wants to protect their iPhone 7 without giving up their stylishness. The Symmetry Series Case is sleek, thin, and pocket-friendly. Hence, you won't have any issues removing it from your pocket or slotting it back in. You also won't feel like you have a weighty object in your pocket whenever you're using this phone case. It has a wraparound design for its colors and graphics, no matter the color you choose. This gives your phone a seamless style. The dual-material construction makes it more viable when it comes to protecting your phone from shocks and drops. There is a bump around the frontal part that helps protect your screen when it falls on flat surfaces.

The OtterBox Symmetry Series Case is easy to install on your iPhone 7 and is also compatible with the iPhone 8 and the iPhone SE 2nd Gen. You should note that if you intend to purchase a phone case for an iPhone 7 plus or 8 plus, this will not work for you. All your phone functions, such as the volume and power work correctly in this case, and you have 19 variations to choose from. The variations include black, fine port, aloha ombre, aqua mint dip, bouquet, clear, drive me daisy, easy breezy, half tone, inside the lines, mix berry jam, mod about you, saltwater taffy, rose gold, newport, muted waters, skinny dip, stardust, and throwing shade. You can go through them and find one that fits your style.

The Spigen Ultra Hybrid is a great phone case for iPhone 7 users. The case is also compatible with the iPhone 8 and the iPhone SE (2020). Spigen lets users choose from a variety of 5 colors to suit each individual's desire as regards their phone. The colors include black, crystal clear, rose crystal, mint, and red. The case has a transparent back area while the sides, top, and bottom are solid. It is made with hybrid technology which gives it thermoplastic polyurethane bumpers at the sides, and polycarbonate back. The Spigen Ultra Hybrid has air cushion technology and clear hybrid drop protection. There are also raised bezels to lift the screen and the camera off flat surfaces to further protect them from scratches and other damages.

The Spigen Ultra Hybrid Case for iPhone 7 has precise cutouts to give you access to the charging port and the speakers. The back of the case also supports wireless charging, so you don't need to take off the case if you ever desire to use a wireless charger with your device. The clear back also lets you personalize your device by making it possible for you to put in stickers or mini-sized photos if you so choose. However, if you want to show off your phone's design, the transparency lets you do that without putting your phone at risk of scratches or breakage. It is important for you to know that the case is not scratch-resistant, though. It simply takes the brunt of what your phone should have suffered. However, you have to seriously drop it before it suffers a scratch, and normal daily usage should not scratch it.

This JETech Case for Apple iPhone is compatible with the Apple iPhone 7, which is the focus of this guide. It also works with the Apple iPhone SE 2nd Generation (2020 Edition) and the 4.7-inch iPhone 8. It is made with polycarbonate and thermoplastic polyurethane. The case has a slim design and is ultra-transparent, so you can still show off your phone while giving it the protection you want. The back is scratch-resistant, so you don't need to fear any scratch occurring as a result of a fall or a bump.

The JETech Case for Apple iPhone has raised bezels around the screen and camera to protect the iPhone 7 in case of a fall. However, you should pair this case with a screen protector to provide full protection for your phone. The shock-absorption qualities help reduce damage if the phone falls and lands on any of the four corners. You can also access your ports, controls, and other phone features with ease. The cutout sectors perfectly match the design of your camera, flashlight, speakers, and charging ports, as well as the left-side switch on your phone.

The JETech Case for Apple iPhone comes with color options such as 'grey,' 'HD Clear,' 'red,' and 'rose gold.' These options have their main influence on the sides and simply provide shade to the transparency of the case. The case is easy to clean in the event of a fingerprint smudge. In all, it is a great phone case if you want a slim case that offers protection for your phone against minor drops and scratches.